It covers the important features and functionalities of NX using relevant examples and exercises. This book is written to assist students, designers, and engineering professionals. You also create flat patterns and 2D sheet metal drawings.įinally, you explore the surface modeling tools used to create complex shapes.Ħ. You will also learn to convert an existing part geometry into sheet metal part.
The Sheet Metal design chapter covers various tools used to build sheet metal parts from scratch. In case of assembly drawings, you insert assembly views, add Bill of Materials, Balloons, and Revision table. You insert part views and add dimensions and annotations to complete the drawing. You create Drawings of the parts and assemblies. You explode assemblies to show the manner in which they were assembled. In the Top-down method, you create parts in the assembly level. In the Bottom-up method, you bring all the parts together and add constraints between them. There are two methods to build assemblies: Bottom-up and Top-down. You build assemblies after creating parts. You explore Synchronous Modeling tools to modify the Part geometry by modifying its faces.
Learn to modify part geometry by editing sketches and feature parameters. You will learn to use some additional modeling tools and work with multi-body parts. You explore mirroring and patterning commands to create repetitive features. You can also add placed features (sketch less features) such as Fillets, and Holes to the 3D geometry. You combine or subtract features to achieve the final part. Sketches are converted into 3D features such as Extrude, Revolve, and so on. Learn to use geometric constraints and dimensions to achieve a definite shape and size of the sketch. You will also learn to modify sketches using tools such as trim, extend, fillets, and so on. You will use various sketching tools such as line, rectangle, circle, and so on. You will learn to sketch on three different planes (Front, Top and Right planes).
Within a short time, you will learn to create 2D sketches that form the basis for 3D models. You begin with brief introduction to NX 11 and the User Interface, ribbon, environments, commands, and various options. NX 11 For Beginners introduces you to the basics of NX 11 by using step-by-step instructions.
0 kommentar(er)
